20" BIG BLUE -  UV-Stabilized Twin Canister Plastic Water Filter.

ACTF BIG BLUE UV STABILIZED POLY WATER FILTER

This unit is very popular for whole house filtration system installations where high pressure or saline water can be a problem.

Or you can Pay at Pickup:  

We have full merchant EFTPOS facilities at our Moggill Depot

Pick-ups by arrangement 9-3 Weekdays at:

3666 Moggill Road MOGGILL BRISBANE

Call 0434141001 to arrange

$20 Handling Fee on filter  pick-ups

Strong and durable Marine-Grade UV Stabilized Poly construction.  Suited to outdoors installation

Contents of Kit:

Twin blue 20" poly housings with mounting bracket 

Cartridge 1 and 2 - Replaceable premium grade 5 micron Granular Activated Carbon (GAC) filter removes microbes, most chemical contaminants, chlorine, taste, odour and some pesticides.

Optional  - Spun PP 1 micron filter cartridge - recommended as secondary filter in canister #2 and a 5 micron GAC in canister #1.

Poly wrench

20mm ports in/out

Features:

Suitable for the treatment of drinking water, as a pre-filter for UV sterilization

systems and membrane ultra-filtration systems.

Made to International Safety Standards.

These filters have a operating pressure of 90PSI and a burst rating of 150PSI and are impervious to salts and UV radiation.

 

 

 

Filter Customers note - Pressure Reducing Valve: 

Different states and local government authorities have different policies about the use of pressure reducing/check valves in filter installations. 

Please check with your local authority for backflow/pressure reduction requirements before installing your filter. 

These filters are designed for pressures well below 100psi/.7MPa (normal city water pressure is around 85PSI). For known or suspected high water pressure installations, we strongly recommend the use of a pressure-limiting valve. 

These valves help protect the filter by keeping pressures within the filter below a safe pressure level, and by stopping backflow into the water main from the filter. 

ACTF supplies a constant pressure/check valve as an optional extra for its range of filters. It is the purchaser’s responsibility to check if such a valve is necessary for his or her own installation. No warranty claims will be accepted for filters damaged by excessive water pressure. 

Installation 

The constant pressure/ pressure-reducing valve is installed at the filter inlet, using the 20mm nipple provided. Its internal plunger works to prevent excess pressure in the filter. 

You need to install the valve with the arrow pointing in the direction of water flow. The valve is pre-set to allow only a maximum of 45PSI in the filter and you do not need to adjust it. Install cold water pipe to valve inlet and plumb the filter in according to instructions.

ACTF 20MM BSP CONSTANT PRESSURE/CHECK VALVE –